ABOUT THE MOTOR:
Moteck SG-2100 dish motor can move the satellite dish from east to west to track the satellites postioned along the Clarke belt. This motor can move dish up to 120cm, letting you watch the world of free to air MPEG2 channels. Easy to install, the SG-2100 motor features a 1 5/8" masthead and points downward.
Moteck SG-2100 works for any offset dish with a U-bolt or Pole mounting up to 120 cm Aluminum or 95 cm Steel. This motor will fit a Winegard 30" dish and FortecStar dishes.
Works with all DiSEqC 1.2, 1.3, Goto X compliant satellite receivers. It utilizes a data stream passed up the LNB co-axial lead to the mount. Only one co-axial cable is needed for installation.
FEATURES:
| Model | SG2100A |
| Antenna Diameter | 1.2M Max. |
| Length of Motor Tube | 18cm |
| Azimuth Angle | 75EAST ~ 75?WEST ( 150? ) Adjustable |
| Elevation Angle | 10?~75? |
| Input / Output Voltage | 13 / 18 VDC |
| Power Consumption | 50 mA ( Standby mode )
200mA ( Normal)
350 mA ( Max.) |
| Rotation Speed | 1.9? / sec ( at 13V) ; 2.5 ?/ sec ( at 18V) |
| Satellite Positions | 60 |
| Connector | F Type |
| Command Protocol | DiSEqC 1.2 |
| Resynchronize Function | YES |
| Goto Position 0 Function | YES |
| Goto X Function | YES |
| Positioning Sensor | Hall Effect Sensor |
| EAST / WEST Limit | Adjustable Hardware and Programmable Software |
| Manual Button | EAST / WEST |
